Control system and components of remote control grab
發(fā)表時(shí)間：2022-01-14 15:55:32
In the process of using the remote control grab, generally, it is directly composed of the upper and lower bearing beam assembly and the bucket body. The sliding seat assembly and the bearing beam assembly are effectively connected with the crane directly. The piston rod and the simplified body in the remote control grab are effectively connected with the sliding seat assembly and the lower bearing beam assembly respectively.
The sliding seat in the remote control grab can effectively slide up and down under the action of the crane. In the process of sliding, it will directly drive the lower bearing beam to lift together. In this way, the closing of the grab in the equipment will directly control the sliding seat and the bearing beam to disengage through the control of the remote control, so that the opening of the grab can be controlled very effectively.
In the process of use, the remote control grab is a novel grab that cooperates with the single cable crane to control the opening through the wireless remote control transmitter. When in use, the equipment does not need external energy. The equipment can automatically close with the lifting of the hook on the material pile, or automatically open at any position in the air, and then stop at any time.
The remote control grab has a battery inside. In the process of use, it can effectively control the opening of the grab by controlling the opening and closing of the solenoid valve. The grab does not need any power supply in the process of use, so it plays a role of green environmental protection.
The remote control grab does not need its additional accessories in the process of use. In the process of use, the oil temperature in the equipment should be low, and the sealing property of the oil pipe is good, which can well ensure the service life of the equipment, so as to directly ensure that the equipment can work continuously for 24 hours.
The control system of the remote control grab can be directly divided into two modules, namely the control module and the hydraulic module. The structure of the whole equipment is relatively simple and very convenient for effective maintenance. When the equipment is just opened, its speed will be relatively slow, which will greatly reduce the impact of unloading on the grab.
The sliding seat in the remote control grab can effectively slide up and down under the action of the crane. In the process of sliding, it will directly drive the lower bearing beam to lift together. In this way, the closing of the grab in the equipment will directly control the sliding seat and the bearing beam to disengage through the control of the remote control, so that the opening of the grab can be controlled very effectively.
In the process of use, the remote control grab is a novel grab that cooperates with the single cable crane to control the opening through the wireless remote control transmitter. When in use, the equipment does not need external energy. The equipment can automatically close with the lifting of the hook on the material pile, or automatically open at any position in the air, and then stop at any time.
The remote control grab has a battery inside. In the process of use, it can effectively control the opening of the grab by controlling the opening and closing of the solenoid valve. The grab does not need any power supply in the process of use, so it plays a role of green environmental protection.
The remote control grab does not need its additional accessories in the process of use. In the process of use, the oil temperature in the equipment should be low, and the sealing property of the oil pipe is good, which can well ensure the service life of the equipment, so as to directly ensure that the equipment can work continuously for 24 hours.
The control system of the remote control grab can be directly divided into two modules, namely the control module and the hydraulic module. The structure of the whole equipment is relatively simple and very convenient for effective maintenance. When the equipment is just opened, its speed will be relatively slow, which will greatly reduce the impact of unloading on the grab.
